Product specification
| Product code | Product codes for the UK and Ireland models | 49085 |
| General | GTIN | 5050400490852 |
| Warranty | 1 years (subject to conditions) | |
| WRAS | WRAS-approved product | |
| Conformity certification | UKCA | CE | |
| Features | Pump type | Centrifugal |
| Pump control | Flow Switch | |
| Mechanical seal | EPDM / Carbon / Al.Oxide | |
| Anti-vibration feet | ||
| Inlet strainer(s) | ||
| Anti-vibration hoses | 4 | |
| Dry run protection | ||
| Typical noise | 53 dB(A) | |
| CONSTRUCTION | ||
| Enclosure protection | IPX2 | |
| Pump body | Plastic | |
| Impeller | Plastic | |
| PERFORMANCE | ||
| Maximum head - closed valve | 2.0 bar / 20 metres | |
| Performance @ 9 l/min | 1.5 bar | |
| Performance @ 18 l/min | 0.9 bar | |
| Maximum flow | 35 L/min | |
| Maximum static inlet pressure | 10 metres | |
| Maximum working pressure* | 300 kPa / 3.0 bar | |
| Maximum ambient air temperature | 40°C | |
| Min / Max water temperature** | Min 4°C / Max 65°C | |
| Flow switch sensitivity | 0.8 L/min (approx) | |
| CONNECTIONS | ||
| Pump connections (Inlet) | G ¾ M | |
| Pump connections (Outlet) | G ¾ M | |
| Anti-vibration hoses | ||
| Connections (Inlet) | G ¾ female x 15 mm push-in x 185 mm long | |
| Connections (Outlet) | G ¾ female x 15 mm push-in x 175 mm long | |
| MOTOR | ||
| Type | Series wound, manual reset thermal trip | |
| Duty rating | Intermittent S3 (30 mins on / 30 mins off @ 9 L/min)*** | |
| ELECTRICAL | ||
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz | |
| Power consumption - P1 | 300 watts | |
| Current - full load | 1.5 amps | |
| Fuse rating (amps) | 3 amps | |
| Power cable length | 1.5 metres (pre-wired) | |
| DIMENSIONS | ||
| Length | 250 mm | |
| Width | 97 mm | |
| Height - excluding hoses | 152 mm | |
| Weight - including fittings | 2.6 Kg | |
| More information | * The maximum pressure that can be applied to the pump under any installation conditions. ** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas. *** Both heads pumping 4.5 l/min and above. | |
