Product specification
| Product code | Product codes for the UK and Ireland models | 46414 |
| General | GTIN | 5050400464143 |
| Warranty | 5 years (subject to conditions) | |
| WRAS | WRAS-approved product | |
| Kiwa | KUKreg4 certified | |
| Conformity certification | UKCA | CE | |
| Features | Pump type | Peripheral |
| Pump control | Pressure & Flow Switch | |
| Mechanical seal | EPDM / PTFE / Al. Oxide | |
| Anti-vibration feet | ||
| Inlet strainer(s) | ||
| Anti vibration hoses | 2 | |
| Run on timer | 3 seconds | |
| Dry run protection | ||
| Typical noise | 55 dB(A) | |
| CONSTRUCTION | ||
| Enclosure protection | IPX4 | |
| Pump body | Brass | |
| Impeller | Brass | |
| PERFORMANCE | ||
| Maximum head - closed valve | 4.5 bar / 45 metres | |
| Performance @ 9 l/min | 3.5 bar | |
| Performance @ 18 l/min | 1.7 bar | |
| Maximum flow | 26 l/min | |
| Maximum static inlet pressure | 12 metres | |
| Maximum static outlet pressure | 12 metres | |
| Maximum working pressure* | 600 kPa / 6 bar | |
| Maximum ambient air temperature | 40 °C | |
| Min / Max water temperature** | Min 4 °C / Max 65 °C | |
| Flow switch sensitivity | 0.6 l/min (approx) | |
| Pressure vessel air pre-charge | 1.3 bar / 18.5 psi | |
| CONNECTIONS | ||
| Pump connections (Inlet) | G ¾ M | |
| Pump connections (Outlet) | G ¾ M | |
| ANTI-VIBRATION HOSES | ||
| Connections (Export model) | G ¾ F x G ¾ F 300 mm long | |
| MOTOR | ||
| Type | Induction, auto-reset thermal trip | |
| Duty rating | Continuous (S1) @ 9 l/min and above*** | |
| ELECTRICAL | ||
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz | |
| Power consumption - P1 | 555 watts | |
| Current - full load | 2.5 amps | |
| Fuse rating (amps) | 5 amps | |
| Power cable length | 1.5 metres (pre-wired) | |
| DIMENSIONS | ||
| Length | 200 mm | |
| Width | 162 mm | |
| Height - excluding hoses | 243 mm | |
| Weight - including fittings | 7.3 Kg | |
| More information | The Monsoon Universal Single Shower Pump is designed for homes with vented water systems, where water is stored in a tank and cylinder rather than supplied directly from the mains. What sets the Universal range apart is its ability to operate in both positive and negative head applications. This means it can perform reliably even when the outlet is positioned above the water source, or where pipework layouts make pressure less predictable. Single pumps are ideal where only one water supply requires boosting — offering a practical solution for targeted pressure improvements in more challenging installations. This model is not suitable for unvented or mains-pressure systems. If you’re unsure which setup you have, our wider pump range includes alternative options designed to suit different household systems and pressure requirements. | |
