Product specification
| Product code | Product codes for the UK and Ireland models | 46420 |
| General | GTIN | 5050400464204 |
| Warranty | 5 years (subject to conditions) | |
| WRAS | WRAS-approved product | |
| Kiwa | KUKreg4 certified | |
| Conformity certification | UKCA | CE | |
| Features | Pump type | Peripheral |
| Pump control | Pressure & Flow Switch | |
| Anti-vibration feet | ||
| Inlet strainer(s) | ||
| Anti-vibration hoses | 4 | |
| Run on timer | 3 seconds | |
| Dry run protection | ||
| Typical noise | 48 dB(A) | |
| CONSTRUCTION | ||
| Enclosure protection | IPX4 | |
| Pump body | Brass | |
| Impeller | Brass | |
| Pump mechanical seal | EPDM/PTFE/AI. Oxide | |
| PERFORMANCE | ||
| Maximum head - closed valve | 4.5 bar / 45 metres | |
| Performance @ 9 l/min | 3.5 bar | |
| Performance @ 18 l/min | 2.4 bar | |
| Maximum flow | 40 l/min | |
| Maximum static inlet pressure | 14 metres | |
| Maximum working pressure* | 600 kPa / 6 bar | |
| Maximum ambient air temperature | 40 °C | |
| Min / Max water temperature** | Min 4 °C / Max 65 °C | |
| Flow switch sensitivity | 0.6 l/min (approx) | |
| CONNECTIONS | ||
| Pump connections (Inlet) | G ¾ M | |
| Pump connections (Outlet) | G ¾ M | |
| ANTI-VIBRATION HOSES | ||
| Connections (Export model) | G ¾ F x G ¾ F, 300 mm long | |
| MOTOR | ||
| Type | Induction, auto-reset thermal trip | |
| Duty rating | Continuous (S1) @ 9 l/min and above*** | |
| ELECTRICAL | ||
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz | |
| Power consumption - P1 | 555 watts | |
| Current - full load | 2.4 amps | |
| Fuse rating (amps) | 13 amps | |
| Power cable length | 1.5 metres (pre-wired) | |
| DIMENSIONS | ||
| Length | 200 mm | |
| Width | 126 mm | |
| Height - excluding hoses | 202 mm | |
| Weight - including fittings | 6.1 Kg | |
| More information | The Monsoon Standard Single Shower Pump is designed specifically for homes with vented water systems, where water is stored in a cold water tank and hot water cylinder rather than supplied directly from the mains. Single pumps are ideal where only one water supply requires boosting, for example, improving hot water flow to a shower or outlet while maintaining the existing cold supply. This makes them a practical solution for targeted pressure improvements within the home. This model is not suitable for unvented or mains-pressure systems, where water pressure is already supplied directly from the mains. If you’re unsure which system you have, our Monsoon range includes alternative options designed to suit different household setups and pressure requirements. | |
