Product specification
| Product code | Product codes for the UK and Ireland models | 46416 |
| General | GTIN | 5050400465058 |
| Warranty | 5 years (subject to conditions) | |
| WRAS | WRAS-approved product | |
| Kiwa | KUKreg4 certified | |
| Conformity certification | UKCA | CE | |
| Features | Pump type | Peripheral |
| Pump control | Pressure & Flow Switch | |
| Mechanical seal | EPDM / PTFE / Al. Oxide | |
| Anti-vibration feet | ||
| Inlet strainer(s) | ||
| Anti vibration hoses | 4 | |
| Run on timer | 3 seconds | |
| Dry run protection | ||
| Typical noise | 48 dB(A) | |
| CONSTRUCTION | ||
| Enclosure protection | IPX4 | |
| Pump body | Brass | |
| Impeller | Brass | |
| PERFORMANCE | ||
| Maximum head - closed valve | 1.5 bar / 15 metres | |
| Performance @ 9 l/min | 1.3 bar | |
| Performance @ 18 l/min | 0.8 bar | |
| Maximum flow | 32 l/min | |
| Maximum static inlet pressure | 8 metres | |
| Maximum static outlet pressure | 8 metres | |
| Maximum working pressure* | 600 kPa / 6 bar | |
| Maximum ambient air temperature | 40 °C | |
| Min / Max water temperature** | Min 4 °C / Max 65 °C | |
| Flow switch sensitivity | 0.6 l/min (approx) | |
| Pressure vessel air pre-charge | 0.9 bar / 13 psi | |
| CONNECTIONS | ||
| Pump connections (Inlet) | G ¾ M | |
| Pump connections (Outlet) | G ¾ M | |
| ANTI-VIBRATION HOSES | ||
| Connections (Export model) | G ¾ F x G ¾ F, 318 mm long ± 5 mm | |
| MOTOR | ||
| Type | Induction, auto-reset thermal trip | |
| Duty rating | Continuous (S1) @ 9 l/min and above*** | |
| ELECTRICAL | ||
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz | |
| Power consumption - P1 | 355 watts | |
| Current - full load | 1.5 amps | |
| Fuse rating (amps) | 5 amps | |
| Power cable length | 1.5 metres (pre-wired) | |
| DIMENSIONS | ||
| Length | 265 mm | |
| Width | 162 mm | |
| Height - excluding hoses | 243 mm | |
| Weight - including fittings | 8.8 Kg | |
| Power consumption - P1 | 355 watts | |
| Current - full load | 1.5 amps | |
| Fuse rating (amps) | 5 amps | |
| Power cable length | 1.5 metres (pre-wired) | |
| DIMENSIONS | ||
| Length | 265 mm | |
| Width | 162 mm | |
| Height - excluding hoses | 243 mm | |
| Weight - including fittings | 8.8 Kg | |
| More information | The Monsoon Standard S3.0 bar Twin Shower Pump is designed specifically for homes with vented water systems typically where water is stored in a cold water tank and hot water cylinder, rather than supplied directly from the mains. If your home experiences low or inconsistent water pressure from gravity-fed systems, this pump helps boost both hot and cold water together, delivering a balanced, more reliable flow to your shower, bathroom, or multiple outlets. This model is not suitable for unvented or mains-pressure systems, where water pressure is already supplied directly from the mains. If you’re unsure which system you have, our range includes alternative options designed for different setups. | |
