Product specification
| Product code | Product codes for the UK and Ireland models | 46634 |
| General | Warranty | 3 years (subject to conditions) |
| WRAS | WRAS-approved product | |
| Conformity Certification | UKCA | CE | |
| Features | Pump type | Peripheral |
| Flexible hoses | 2 | |
| Pressure vessel nominal size | 80 litres | |
| Pressure vessel usable capacity | 44 litres | |
| Upstream line-in kit | 15 mm | |
| Mounting | Floor or plinth | |
| Dry run protection | ||
| Typical noise | 46 dB(A) | |
| MATERIALS | ||
| Pressure vessel | Epoxy coated steel | |
| Membrane | Butyl rubber | |
| Pump body | Brass | |
| Impeller | Brass | |
| Mechanical seal | EPDM / PFTE / AI. Oxide | |
| PERFORMANCE | ||
| Maximum head - closed valve | 3.2 bar (32 metres) | |
| Maximum flow | 16 L/min | |
| Maximum working pressure* | 450 kPa (4.5 bar) | |
| Maximum ambient air temperature | 40°C | |
| Min / Max water temperature | Min 4°C / Max 35°C | |
| Flow switch sensitivity | 0.6 L/min (approx) | |
| CONNECTIONS | ||
| Connections - inlet | G ¾ male | |
| Connections - outlet | G ¾ male | |
| Flexible hoses | ||
| Connections | G ¾ female x 15 mm push-in x 200 mm long | |
| Motor | ||
| Type | Induction (auto-reset thermal trip) | |
| Duty rating | Continuous (S1) | |
| ELECTRICAL | ||
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz | |
| Power consumption - P1 | 365 watts | |
| Current - full load | 1.7 amps | |
| Fuse rating (Amps) | 5 amps | |
| Power cable length | 1.5 metres (pre-wired) | |
| PHYSICAL | ||
| Enclosure protection | IPX4 | |
| Length | 480 mm | |
| Width | 457 mm | |
| Height - excluding hoses | 852 mm | |
| Weight - including fittings | 23.9 kg | |
| Weight - filled | 67.9 kg | |
| Weight - maximum | 103.9 kg | |
| GTIN 13 DIGIT | 5050400466345 | |
| More information | Product Discontinued – replaced by the new STORMBOOST 80 FLOMATE MBF-80 can be connected directly to the incoming mains and will deliver up to 16 litres/minute flow at 3.2 bar pressure to multiple outlets within the property, up to the preset cut-in limit of the 60 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges. Designed for low occupancy properties with one bathroom and fits neatly within a standard 500 mm kitchen base unit. | |
