Product specification
| Product code | Product codes for the UK and Ireland models | 46677 |
| General | GTIN | 5050400466772 |
| Warranty | 3 years (subject to conditions) | |
| WRAS | WRAS-approved product | |
| Conformity certification | UKCA | CE | |
| Features | Pump control system | Fixed speed, pressure switch |
| Control interface | Standard controls | |
| Flexible connection hose - outlet | ||
| Dry run protection | ||
| System check valve | ||
| Typical noise | 62 dB(A) | |
| Fluid category | CAT 5 | |
| Water tank air gap | Type AB | |
| Pressure vessel | 8 litres (10 bar) | |
| Performance | ||
| Maximum head - nominal closed valve | 4.5 bar / 45 metres | |
| Maximum flow rate | 100 L/min | |
| Maximum inlet pressure - static | 7 bar (700 kPa) | |
| Maximum outlet pressure - static | 15 metres | |
| Ambient air temperature | Min 4°C - Max 30°C | |
| Water tank | ||
| Nominal water tank size | 220 litres | |
| Usable water capacity | 200 litres | |
| Float valve type | Equilibrium | |
| Water tank fill rate | 20 L/min* | |
| Connections | ||
| Inlet connection | G ½ M | |
| Pump outlet connection | G ¾ male | |
| Outlet flexible hose | G ¾ female x 22 mm push-in (220 mm long) | |
| Overflow | G 1¼ compression | |
| Materials | ||
| Water tank | Polyethylene | |
| Front panel | Acrylic capped ABS | |
| Pump | ||
| Pump type | Multistage centrifugal | |
| Pump body | Brass / stainless steel | |
| Pump impeller | Stainless steel | |
| Duty rating | Continuous (S1) @ 5 L/min and above | |
| Motor type | Induction motor (auto-reset thermal trip) | |
| Electrical | ||
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz | |
| Power consumption - P1 | 1260 Watts | |
| Current - full load | 5.5 Amps | |
| Fuse rating | 10 amps | |
| Power cable length | 3 metres (pre-wired) | |
| Physical | ||
| Width | 536 mm | |
| Depth | 529 mm | |
| Height | 1504 mm | |
| Weight - including fittings | 55 kg | |
| Weight - filled | 255 kg | |
| * Assumes 1 bar inlet pressure | ||
| More information | Integrated Booster System Inadequate flow rates and water pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution. | |
